Support
CutLog versions

facebook Twitter icon instagram

  • improved
  • fixed
  • deleted

v3.01.14460

on 15 September 2009
  • FlexiCut2 - possibility to limit parity of center timber segments (even/odd/any)
  • FlexiCut2 - Batch Export to Excel - add new cummulative sheet (one line for one diameter)
  • FlexiCut2 - Showing levels for better settings of equipment
  • FlexiCut2 - Optional print of addition page with level dimensions

v3.01.14139

on 24 June 2009
  • FlexiCut2 - added volume coefficient for chips and sawdust
  • FlexiCut2 - menu reorganization
  • FlexiCut2 - add red arrow to indicate rotation of log
  • FlexiCut2 - Batch run - find optimum diameter for given timber
  • FlexiCut2 - show log volume

v3.01.13920

on 17 May 2009
  • FlexiCut2 - speed optimization - can be 4-12 times faster than before!
  • FlexiCut2 - Possible to have only one kind of board in one saw segment

v3.01.13661

on 17 March 2009
  • FlexiCut2 - Possibility to limit number of different board sizes in side boards
  • FlexiCut2 - added possibility to fix middle board in the center for the same size
  • FlexiCut2 - Able to set upper and lower limit of prism width
  • FlexiCut2 - Allow to set limit of boards in one side saw segment
  • FlexiCut2 - allow to set directly thickness of sawing segments for each pass
  • FlexiCut2 - possibility to have only one kind of board size in one segment (1st and 2nd pass)
  • FlexiCut2 - decrease "virtual" diameter of log
  • FlexiCut2 - Allow to set difference from SED directly
  • FlexiCut2 Batch - allow define exact differences from SED (list)
  • FlexiCut2 Batch - export SED difference into MS Excel
  • FlexiCut2 - allow disable rotating of side boards due to technology limits
  • FlexiCut2/CircullarCut - allow define exact diameters for batch processing
  • FlexiCut2 - allowing to rotate pattern by 90deg
  • FlexiCut/FlexiCut2/CircularCut - show board info in drawing scheme
  • FlexiCut - Possibility to limit number of different board sizes in side boards
  • FlexiCut - Able to set upper and lower limit of prism width
  • PatternCut/FlexiCut/FlexiCut2/MultiCut/CircullarCut - export to MS Excel - show yield
  • FlexiCut/FlexiCut2 add correct file extension for Batch export into excel (xsl/xlsx)
  • FlexiCut - rearange of controls for better usability

v3.00.12668

on 08 November 2008
  • All optimizations - load and save screen settings into file
  • FlexiCut batch - cummulatives in Excel export